THERMAL BREAK COMMERCIAL
Great finish with good insulation properties
The Thermal Break Commercial insulated roller shutter is suitable for commercial and industrial usage. The shutter's curtain is a foam filled steel 90mm profile of contemporary design. Suitable for high usage the shutter provides a secure insulated portal between environments.
- Certified U value of 3.3 w/m2k
- Spans widths up to 8000mm with effective heat and sound insulation
- Single and three phase motor options relative to use and size
- Range of control options
- Range of standard factory colour finishes
Certifications
Tech Info
Roller Head Plate Sizes
Standard Specification
Colour Finish
Anthracite
RAL 7016
Black
RAL 9005
Chili Red
RAL 3000
Dark Green
RAL 6009
Dark Grey
RAL 7011
Galvanised
Golden Oak
Goosewing Grey
RAL 7038
Juniper Green
BS12 B29
Merlin Grey
BS18 B25
Moorland Green
BS12 B21
Olive Green
RAL 6003
Red
Sargasso
RAL 5003
Silver
RAL 9006
Solent Blue
BS18 E53
Van Dyke Brown
RAL 8014
White
RAL 9003
General Options
Fitting Configurations
Security
Security Gates
Ground Locks
Anti-Tamper Controller
Anti-Tamper Controller
Anti-Ram Bollards
Pinlocks
Pinlocks
Safety
Laser Safety Sensor
Light Curtains
Reflected Photoelectric Cell
S/R Photoelectric Cell
Safety Pressure Edge Wireless
Safety Pressure Edge Wired
Battery Backup
Drive Motor Options
Operation & Controls
Falcon
Milan
Condor
Magic Switch
Level 1 Control Panel
- Load monitoring in the open direction
- Digital display of door status and/or fault diagnostic
- Operations cycle counter (non re-settable)
- Three selectable door functions
- Connection for a plug-in spiral cable for cable break or slack wire switches or pass door switch on sectional doors
Level 1 Control Panel
Level 2 Control Panel
- Programmable Door Maintenance Indicator with three response modes including the option for the service due function to be overridden the once to allow a further 500 cycles
- Automatic adjustment for changes in floor level and/or cable stretch
- 1 to 240 second variable timed closing
- Automatic recognition of the safety edge type
- Function to prevent unintentional activation of photo beam
- Digital limits allow the operation of the drive to be monitored and stopped if the drive is stalled or overloaded
Level 2 Control Panel
Level 3 Control Panel
- Limit switch setting from ground level
- Digital display of door status and/or fault diagnostic
- Operations cycle counter (non re-settable)
- Programmable door maintance indicator
- Dedicated traffic light relay options
- Two additional relay output functions
- Monitored safety devices for high level anti-trapping
- Airlock module for interlocking doors
- Door status monitoring of modules at remote locations
- Certified to BS EN 12453
Level 3 Control Panel
Induction Loop
Induction Loop
Fire Brigade Switch
Smoke & Heat Detector