Maximum visibility, variety of designs
Designed for retail and commercial applications the CR-RG is an electrically operated roller grille powered via an internal single phase 240 volt tubular motor. The roller curtain is constructed from aluminium tubes with an overall diameter of 12mm x 111mm, link sections of 70mm x 3mm (other sizes available) held together by galvanised steel rods of 8mm diameter. The grille curtain is available in a brick bond or inline pattern.
- Variety of tube sizes for a range of designs
- Powdercoated finish to any BS or RAL
- Shutter curtain can be mixed with other sections, 75mm curved steel, 50mm steel
Roller Head Plate Sizes
Protective BollardsWe offer a range of protective bollards to prevent collision damage to your door set. Information on request.
Angle ProtectionFloor fixed heavy duty angle protection.
Polycarbonate GlazingThis model can be modified with the inclusion of a section of translucent polycarbonate glazing. It is impact resistant and can filter UV rays. A glazing section is the best way to add additional visual access through the shutter for the purposes of display or safety.
Ground LocksLocks with interlock safety that fit into the ground and and are fixed with a shutter padlock.
Security GatesHigh level of security for sensitive areas designed to be fitted on the inside of roller shutters and sectional doors.
Anti-Ram BollardsA highly visual and effective deterrent against frontal vehicle assault and accidental damage.
Keyswitch LockboxSecurity box to protect externally mounted keyswitches.
PinlocksFor additional security, pin locks can be added to a range of shutters. The lock fits into a casting on the roller shutters guide section. The pin fits through this casting and the roller shutter curtain to stop the curtain from attempts at lifting it. For electric doors a safety interlock is recommended to avoid accidentally attempting to open the shutter when locked.
Bottom Rail LockILS lock that connects to bottom bar and extends into guides for extra security.
Bottom Rail Lock
Anti-Tamper ControllerInterfaces directly with a key switch, the shutter is made inoperable if the key switch is attacked by vandals or thieves. The system can also be linked to a burglar alarm further increasing security measures. Has a low voltage control circuit removing the risk of electric shocks, making the product ideal for use in public areas.
Battery BackupWe provide a range of battery backup or UPS systems (uninterrupted power supplies) to ensure the door system will remain operational during times when the power is lost (limited amount of cycles before battery will be drained, battery backups require maintenance).
Laser Safety SensorThis laser sensor is used to open, secure and/or detect a presence. It offers great flexibility in defining the width and depth of the detection zones.
Laser Safety Sensor
Light CurtainsWe offer a range of safety light curtains to prevent injury to people or equipment from unobserved travel of a door system.
Reflected Photoelectric CellThis unit beams and reflects an infra red signal, if the beam is broken the door will stop or return upwards.
Reflected Photoelectric Cell
S/R Photoelectric CellThis unit has two sensors which send a constant signal between them. Should the beam be broken the door will stop or return to the open position.
S/R Photoelectric Cell
Operation & Controls
KeyswitchesWe offer a range of key switch controls.
Group ControlAllows multiple doors to be controlled with a single controller.
Fire Brigade SwitchThis specialised key switch enables authorised fire service personnel to quickly operate the door in the event of a fire or other emergency situation.
Fire Brigade Switch
Biometric ControlsFingerprint reader control unit for extra security.
Smoke & Heat DetectorWill send a signal to close upon detecting smoke or excessive heat.
Smoke & Heat Detector