HIGH SPEED ULTRA

Dual function, speed and security

The quick action roller shutter Ultra model combines the advantages of an aluminium roller shutter with those of a PVC roller door. A fully functioning external shutter with resistance to weather and wind forces, security and good heat insulation, it opens at a speed normally only achieved by PVC roller doors - 2 metres per second.

The door is made from extruded aluminium slats with 20mm double walled insulation, with noise deadening rubber profile between the slats. This model features a direct drive shaft mounted high speed motor. Side tension springs integrated into the frame support the drive motor and ensure the weight of the shutter is balanced and operational noises are considerably reduced.

• High speed operation decreases the energy costs for heating and/or cooling of a building
• Improved climatic working conditions
• Large, side-mounted, maintenance-free tension springs in the shutter frame
• Side servicing hatch (all moveable components easily accessible)
• Soft start and stop - door runs smoothly and quickly due to frequency control
• Minimum energy and heat loss thanks to fast opening and closing
• Available in almost all RAL colours
• Viewing holes or ventilation shutters can be built-in

Certifications

• BS EN 13241-1:2003 - Industrial, commercial and garage doors and gates Product standard - Products w/out fire/smoke resistance
• BS EN 12424:2000 - Industrial, commercial and garage doors and gates. Resistance to wind load. Classification 5
• BS EN 12426:2000 - Industrial, commercial and garage doors and gates. Resistance air permability. Classification 2
• BS EN 12425:2000 - Industrial, commercial and garage doors and gates. Resistance water permability. Classification 5
• BS EN 12453:2001 - Industrial, commercial and garage doors and gates. Safety in use of power operated doors

Tech Info

• Max size: 6m x 6m
• Weight: 14kg/m²
• Width: 1500mm-8000mm
• Height: 2000mm-8000mm
• Opening speed: 2m/sec
• Closing speed: 0.7m/sec
• Power supply: 400V/50Hz/1A/2.2kW
• Electrical elements: IP54

Roller Head Plate Sizes

• 650 to 900 mm (depending on the size)

Standard Specification

• Side rails are made from galvanised sheet steel
• Side rails are easily assembled
• Also available in stainless steel for the food industry
• Roller door is driven directly by a geared electro-motor
• The drive is scarcely loaded thanks to the integrated draw springs side rails which balance the weight of the door

Colour Finish

• Polyester powder coat finish to BS colour or RAL number
• Range of corporate branding packages including full colour graphics
• Galvanised

General Options

Protective Bollards

Angle Protection

Polycarbonate Glazing

Coil Casing

Fitting Configurations

• Face fit

Security

Security Gates

Keyswitch Lockbox

Ground Locks

Anti-Tamper Controller

Anti-Ram Bollards

Pinlocks

Bottom Rail Lock

Safety

Laser Safety Sensor

Warning Lights

Battery Backup

Reflected Photoelectric Cell

S/R Photoelectric Cell

Safety Pressure Edge Wired

Traffic Lights

• Illuminated status indicators

Drive Motor Options

High Speed FI Drive

Operation & Controls

Falcon

Milan

Condor

Magic Switch

Activ8

Level 1 Control Panel

Level 2 Control Panel

Level 3 Control Panel

Induction Loop

Keyswitches

Keypads

Mushroom Push Button

Pull Cord

Biometric Controls

Push Buttons

Smoke & Heat Detector

Access Control Relay

Industrial Remote Control

RFID Radio Controls

• Remote Control - One touch operation
• GSM Access
• Software/network connection
• Wind sensor
• Sun sensor
• Fire alarm activation