• E60-240 Fire Shutters
  • E60-240 Fire Shutters
  • E60-240 Fire Shutters
  • E60-240 Fire Shutters
  • E60-240 Fire Shutters

    E60-240

    Commercial fire shutter model

    The Guardian E60-240 fire resitant roller shutter provides a protective barrier in the event of a fire. They also double as a security shutter solution and are suitable for use every day.

    All made to measure in the UK to the latest British and European standards the E60-240 is available with a 60, 120 or 240 minutes fire rating. We offer a range of control options for the activation of the shutter in the event of a fire as well as normal every day opening and closing.

    Explanation of Fire Rating Symbols

    Integrity & Insulation
    E - Integrity This is the ability of a test component to stop fire from spreading to an unexposed side as a result of penetration of flames or smoke.
    I - Insulation This is the ability of a test component to restrict the temperature rise of the non-heated side to below specified levels during the fire, which is not more than +140°C up to +180°C.
    Integrity & Radiation Reduction
    E - Integrity This is the ability of a test component to stop fire from spreading to an unexposed side as a result of penetration of flames or smoke.
    W – Reduction of thermal radiation This is the ability of a test component to resist fire exposure on one side only, so as to reduce the probability of the transmission of fire as a result of significant radiated heat either through the element or from its unexposed surface to neighbouring objects.

    All of the above parameters are followed by a time limit in minutes. The number after a given symbol shows the time the performance criteria is fulfilled during a standardised fire test, eg. EI120, EW60, etc.


    Certifications

    • Tested and assessed by Exova Warringtonfire - Cert ref 314388
    • Tested and accredited in accordance with clause 8 of BS476 part 22:1987
    • Tested and accredited in accordance with BS EN 1634-1:2008

    Tech Info

    • Max size 28m2
    • Weight - 20kg/m2

    Standard Specification

    • 75mm single skin steel lath
    • Guardian standard fire door interface
    • UPS - Battery backup unit
    • Low voltage push button push station or keyswitch control

    Colour Finish

    • Polyester powder coat finish to BS colour or RAL number
    • Range of corporate branding packages including full colour graphics
    • Galvanised

    General Options

    Protective Bollards

    We offer a range of protective bollards to prevent collision damage to your door set. Information on request.
    • Protective Bollards

      We offer a range of protective bollards to prevent collision damage to your door set. Information on request.

      Protective Bollards

      Angle Protection

      Floor fixed heavy duty angle protection.
      • Angle Protection

        Floor fixed heavy duty angle protection.

        Angle Protection

        Fitting Configurations

        • Face fit
        • Reveal fit

        Safety

        Warning Lights

        Warning lights to alert users when doors are in operation.
        • Warning Lights

          Warning lights to alert users when doors are in operation.

          Warning Lights

          Battery Backup

          We provide a range of battery backup or UPS systems (uninterrupted power supplies) to ensure the door system will remain operational during times when the power is lost (limited amount of cycles before battery will be drained, battery backups require maintenance).
          • Battery Backup

            We provide a range of battery backup or UPS systems (uninterrupted power supplies) to ensure the door system will remain operational during times when the power is lost (limited amount of cycles before battery will be drained, battery backups require maintenance).

            Battery Backup

            Reflected Photoelectric Cell

            This unit beams and reflects an infra red signal, if the beam is broken the door will stop or return upwards.
            • Reflected Photoelectric Cell

              This unit beams and reflects an infra red signal, if the beam is broken the door will stop or return upwards.

              Reflected Photoelectric Cell

              S/R Photoelectric Cell

              This unit has two sensors which send a constant signal between them. Should the beam be broken the door will stop or return to the open position.
              • S/R Photoelectric Cell

                This unit has two sensors which send a constant signal between them. Should the beam be broken the door will stop or return to the open position.

                S/R Photoelectric Cell

                Safety Pressure Edge Wired

                Installed on the door's bottom edge, the sensor when activated will return the door to the open position.
                • Safety Pressure Edge Wired

                  Installed on the door's bottom edge, the sensor when activated will return the door to the open position.

                  Safety Pressure Edge Wired

                  • Illuminated status indicators

                  Operation & Controls

                  Mushroom Push Button

                  Hand/foot switch station with a large dome head.
                  • Mushroom Push Button

                    Hand/foot switch station with a large dome head.

                    Mushroom Push Button

                    Fire Brigade Switch

                    This specialised key switch enables authorised fire service personnel to quickly operate the door in the event of a fire or other emergency situation.
                    • Fire Brigade Switch

                      This specialised key switch enables authorised fire service personnel to quickly operate the door in the event of a fire or other emergency situation.

                      Fire Brigade Switch

                      Push Buttons

                      We offer a range of push button controls.
                      • Push Buttons

                        We offer a range of push button controls.

                        Push Buttons

                        Biometric Controls

                        Fingerprint reader control unit for extra security.
                        • Biometric Controls

                          Fingerprint reader control unit for extra security.

                          Biometric Controls

                          Access Control Relay

                          Card reader access control.
                          • Access Control Relay

                            Card reader access control.

                            Access Control Relay

                            Standard Fire Door Interface Panel

                            Supplied with all electric single phase shutters the unit transforms 240V power into safe 24V ensuring safety for the operator at all times. The unit is compliant with the Low Voltage Directive (LVD) The LED on the front of the panel has a colour code as follows:

                            • Amber when mains power is detected
                            • Green when opening the shutter
                            • Red when the shutter is closing
                            The control unit can also be connected via a continuous volt free signal to a fire alarm to open or close the shutter when the alarm is activated
                            • Standard Fire Door Interface Panel

                              Supplied with all electric single phase shutters the unit transforms 240V power into safe 24V ensuring safety for the operator at all times. The unit is compliant with the Low Voltage Directive (LVD) The LED on the front of the panel has a colour code as follows:

                              • Amber when mains power is detected
                              • Green when opening the shutter
                              • Red when the shutter is closing
                              The control unit can also be connected via a continuous volt free signal to a fire alarm to open or close the shutter when the alarm is activated

                              Standard Fire Door Interface Panel

                              RFID Radio Controls

                              We offer a range of RFID activation options. Activation at 1.5M, 3M and 5M ranges from the receiver.
                              • RFID Radio Controls

                                We offer a range of RFID activation options. Activation at 1.5M, 3M and 5M ranges from the receiver.

                                RFID Radio Controls

                                • Remote Control - Hold to run
                                • GSM Access
                                • Software/network connection
                                • Wind sensor
                                • Sun sensor
                                • Fire alarm activation

                                Activation Methods

                                The primary activation method for fire shutters is via the main fire alarm system. The signal from the fire alarm is routed via one of the below control units, giving the shutter a command to close.

                                In situations where there is no main fire alarm panel we can provide a standalone system that activates the fire alarm via one of the methods below as indicated with a * (please note for a standalone system an Audio Visual FDI panel is required).

                                Standard Fire Door Interface Panel

                                Supplied with all electric single phase shutters the unit transforms 240V power into safe 24V ensuring safety for the operator at all times. The unit is compliant with the Low Voltage Directive (LVD) The LED on the front of the panel has a colour code as follows:

                                • Amber when mains power is detected
                                • Green when opening the shutter
                                • Red when the shutter is closing
                                The control unit can also be connected via a continuous volt free signal to a fire alarm to open or close the shutter when the alarm is activated
                                • Standard Fire Door Interface Panel

                                  Supplied with all electric single phase shutters the unit transforms 240V power into safe 24V ensuring safety for the operator at all times. The unit is compliant with the Low Voltage Directive (LVD) The LED on the front of the panel has a colour code as follows:

                                  • Amber when mains power is detected
                                  • Green when opening the shutter
                                  • Red when the shutter is closing
                                  The control unit can also be connected via a continuous volt free signal to a fire alarm to open or close the shutter when the alarm is activated

                                  Standard Fire Door Interface Panel

                                  FCP03 Audio Visual Panel

                                  The FCP03 Fire Control Panel provides total control of commercial and industrial fire resisting roller shutter doors in the event of a fire. The FCP03 interfaces directly with the fire alarm on the premises and provides the fire-resisting roller shutter with the intelligence to close in the event of an emergency situation, protecting both occupants and premises from exposure to smoke and flame damage.
                                  • FCP03 Audio Visual Panel

                                    The FCP03 Fire Control Panel provides total control of commercial and industrial fire resisting roller shutter doors in the event of a fire. The FCP03 interfaces directly with the fire alarm on the premises and provides the fire-resisting roller shutter with the intelligence to close in the event of an emergency situation, protecting both occupants and premises from exposure to smoke and flame damage.

                                    FCP03 Audio Visual Panel

                                    EMC3B Audio Visual Panel

                                    Principally this unit is designed to delay the closing of the fire shutter; generally the fire alarm is linked to the audio visual unit. There is no need for a separate relay; there is already a relay in the FDI. On activation from the fire alarm the unit starts to flash and sound, this unit contains a programmable timer which effectively delays the signal to the relay in the panel to close the door.
                                    • EMC3B Audio Visual Panel

                                      Principally this unit is designed to delay the closing of the fire shutter; generally the fire alarm is linked to the audio visual unit. There is no need for a separate relay; there is already a relay in the FDI. On activation from the fire alarm the unit starts to flash and sound, this unit contains a programmable timer which effectively delays the signal to the relay in the panel to close the door.

                                      EMC3B Audio Visual Panel

                                      Smoke & Heat Detector

                                      Will send a signal to close upon detecting smoke or excessive heat.
                                      • Smoke & Heat Detector

                                        Will send a signal to close upon detecting smoke or excessive heat.

                                        Smoke & Heat Detector

                                        Fusible Link

                                        Fusible links melt and activate the door system at a specific temperature.
                                        • Fusible Link

                                          Fusible links melt and activate the door system at a specific temperature.

                                          Fusible Link

                                          Peace of Mind Warranties

                                          All Guardian products are guaranteed against defect of material or workmanship by Guardian Doors, subject to correct maintenance and operation, for a period of 12 months from the date of installation. We offer extended warranties for up to 5 years with an agreed maintenance contract. Call us on 0800 7836602 for more details.

                                          Business Hours

                                          Monday - Friday
                                          8:00 to 17:00
                                          Saturday - Sunday
                                          Closed

                                          Our 24 hour emergency repair service is available every day - call 0800 7836602

                                          Privacy Policy & Cookies

                                          This website uses cookies that are necessary to its functioning and required to achieve the purposes illustrated in the privacy policy. By accepting this OR continuing to browse, you agree to our privacy policy.